Silk'n Conductive Slider Gel for Microcurrent & RF Devices — 4.4 fl oz, Hyaluronic Hydrating, Water-Based Conductive Gel

Silk'n Conductive Slider Gel is a clear, water-based hyaluronic gel designed to conduct radio frequency, microcurrent and EMS energy safely while providing smooth glide and hydration during at-home skin tightening treatments.

This purpose-built conductive gel is the official companion for Silk'n FaceTite, Titan and Silhouette devices and works with most at-home microcurrent, RF and EMS tools that require a clear, water-based medium. It creates a low-friction surface for treatment heads to move across the skin, helps dissipate heat evenly, and supports hydration with sodium hyaluronate. The formulation is paraben-, sulfate- and fragrance-free and is suitable for a wide range of skin types when used according to device instructions.

How does this gel improve comfort and safety during RF or microcurrent sessions?

The gel forms a continuous conductive layer that enables energy to transfer evenly, reducing hot spots and skin drag. Because the formula is 91% water-based, it helps dissipate heat across the treatment area so devices can operate as intended without excessive friction.

• Creates a smooth glide to prevent pulling or pinching sensations.
• Promotes even energy distribution to avoid localized overheating.
• Reduces the chance of transient redness by maintaining a hydrated interface.
• Compatible with bipolar RF heads and typical microcurrent/EMS electrodes.

Will this gel work with devices other than Silk'n models?

Yes—while optimized for Silk'n FaceTite, Titan and Silhouette, this clear, water-based gel is compatible with most at-home microcurrent, RF and EMS devices that require a water-based conductive medium. Always check your device manual for recommended gel types before use.

• Suitable for many consumer microcurrent, RF and EMS devices requiring clear, water-based gel.
• Not recommended if your device specifically requires an oil-based or silicone medium.
• Always apply a thin, even layer; excess product does not improve conduction.

What skin benefits does the formula provide beyond conductivity?

In addition to enabling safe energy transfer, the gel contains sodium hyaluronate to support skin hydration during and after treatment. The lightweight, water-based texture absorbs partially while leaving enough surface moisture for device glide and effective conduction.

• Contains hyaluronic ingredient to help hold moisture at the skin surface.
• Fragrance-, paraben- and sulfate-free for a cleaner formulation profile.
• Vegan ingredient list and tested for compatibility with a range of skin types.

How should I use the Slider Gel for best results?

Apply a thin, even layer to the planned treatment area before turning on your device. A small amount covers a large area when spread evenly; using significantly more than recommended will not increase performance and may interfere with device contact.

• Dispense a pea- to nickel-sized amount and spread into a thin layer.
• Reapply sparingly when the gel dries during a session to maintain glide.
• Do not use on broken, irritated skin or on/near the eyes; stop use if irritation appears.

Who this product is for: Silk'n Conductive Slider Gel is intended for people who use Silk'n FaceTite, Titan or Silhouette devices as well as other compatible at-home microcurrent, RF or EMS tools that require a clear, water-based conductive gel. It's formulated for all skin types and tones and for users seeking a comfortable, hygienic conductive medium with added hydration. It is not suitable for use on damaged skin, for children under six, or anywhere your device manual advises against application.

• PURPOSE-BUILT FOR SILK'N FACETITE, TITAN & SILHOUETTE – Engineered as the official conductive medium for Silk'n at-home RF skin tightening devices, this water-based gel ensures bipolar Radio Frequency energy transfers safely and evenly into the skin. Without a clear water-based gel, an RF device cannot deliver its treatment — and using the wrong product can cause dragging, overheating or reddening.
• PROTECTS SKIN FROM OVERHEATING & REDDENING – The 91% water-based formula creates a smooth, conductive layer between device and skin so the treatment head glides without friction and heat dissipates evenly. Designed to keep your treatment comfortable from the first session, even on the highest energy setting.
• COMPATIBLE WITH MICROCURRENT, RF & EMS DEVICES – While engineered for the Silk'n line, the clear, water-based, fragrance-free formula makes this slider gel a versatile conductor for at-home microcurrent, radio frequency and EMS skin tightening devices. Apply a thin layer before treatment for an effortless glide.
• HYALURONIC ACID HYDRATION, SUITABLE FOR ALL SKIN TYPES – Enriched with sodium hyaluronate to help the skin hold moisture during and after treatment. Free from parabens, sulfates and fragrance — formulated with a vegan ingredient list, cleared by Silk'n for all skin types and tones.
• 130 ML / 4.4 FL OZ TUBE FROM A TRUSTED GLOBAL BRAND – Silk'n at-home professional aesthetic devices are trusted by over 10 million users worldwide. Each tube supplies enough gel for multiple weeks of treatment at the recommended 2–3 sessions per week.

Ingredients

Aqua (Water), Glycerin, Propylen Glycol, Triethanolamine, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Carbomer, Phenoxyethanol, Potassium Sorbate, Sodium Hyaluronate, Sodium Chloride, Piroctone Olamine, Caprylyl Glycol, 1,2-Hexanediol