Ruppence Shower Foot Rest — Wall-Mounted Suction Shower Step, Supports 220 lb, No-Drill

Ruppence Shower Foot Rest is a wall-mounted shower step that attaches with a vacuum pump and oversized suction cup to steady your foot for shaving, pedicures, and washing.

This compact, no-drill shower step installs in seconds and supports up to 220 lbs, offering a safer, more comfortable angle for grooming and bathing tasks. Built from sturdy ABS plastic and flexible rubber, the piece lifts your foot to reduce bending and slipping while using a simple pump-and-lock suction system with a visible red line to confirm secure attachment.

How does the suction system work and how do I know it's secure?

It uses a vacuum pump integrated into the mounting pad; when the pump compresses the air under the cup, it forms a strong seal against smooth, nonporous surfaces. A red indicator line shows whether the suction is complete—if you can still see the line, keep pumping until it disappears.

• Press the cup firmly to the surface before pumping.
• Continue pumping until the red warning line is no longer visible.
• To remove, release the valve or gently pull the tab to break the seal without tools.

What surfaces will it stick to and which should I avoid?

The step adheres best to flat, smooth, and non-porous materials such as glass, large-format tile, and polished marble. It is not intended for painted walls, textured or rough finishes, cracked tiles, or very small tiles under about 5.2 inches wide.

• Recommended: glass shower doors, glazed ceramic tile, polished stone.
• Not recommended: small mosaic tiles, textured/grit finishes, painted drywall.
• Always test placement and weight before full use.

How does the design improve safety and comfort when shaving or washing?

The platform is slightly angled and textured to keep the foot steady while you shave or scrub, reducing the need to bend and lowering fall risk. Wall mounting raises the foot to a convenient height so you can maintain balance and control.

• Angled platform helps prevent foot slippage.
• Textured surface adds grip even when wet.
• Elevates the foot to reduce bending and strain on the back.

How do I install and what's the weight capacity?

Installation takes three quick steps: clean and dry the chosen area, press the suction cup to the surface and pump until the red line hides, then open the step. The oversized suction cup and materials are rated to support users up to 220 lbs when properly installed.

• Step 1: Wipe surface clean and dry thoroughly.
• Step 2: Press cup vertically and operate the pump until indicator disappears.
• Step 3: Swing the step open and test with light pressure before full use.

Who this is for: The Ruppence Shower Foot Rest is ideal for anyone who wants an easier, safer way to shave legs, perform pedicures, or clean shoes in the shower—especially helpful for older adults, pregnant people, or those with limited mobility or back sensitivity. It’s a simple, removable upgrade for rental bathrooms and households where drilling into tile is not an option.